14 x 20 Condenser W/ Drier & Trans Cooler

Aluminum parallel (superflow) flow condenser with an oring drier, and a billet aluminmum transmission cooler mounted across the bottom.  The drier is connected to the condenser with a 5/16" aluminum tube.  The setup comes pre-assembled, ready to install.  The drier has a sight glass and a pressure switch port.  The tranmission cooler is 12 inches with fins on the inside and outside for maximum area cooling.   The transmission cooler includes NPT nipples for 3/8" hose.  The cooler is designed to allow the oil to flow straight through while oil sits in the cooler to lower the tranmission fluid temperature.  The setup is all aluminum for maximum heat disipation.

The setup measurements are below:

• Condenser overall size: 14" tall 25-3/8" (with fittings, drier, and cooler) wide
• Condenser core size: 13-1/2" tall x 20" wide
• Condenser thickness with cooler and drier: 5"
• Condenser height with cooler: 15-1/4"
• Tranmission cooler width: 14-1/2" w/o nipples
• Electric fan mounting area will allow for a 10" electric fan