1967 - 1972 Chevy Truck In-Dash A/C Heat System
1967 - 1972 Chevy truck universal heat air and defrost system. The evaporator unit will mount behind the dash of the truck, with vents mounting in or under the dash. This kit integrates the factory cable operated controls, you will have to send us your control panel for us to update it. The kit will hook up to the factory defrost outlet under the dash. The glove box will not intefere with this system, and the firewall will not require any major modifcation (Firewall will need holes for the hoses). We recommend leaving the factory heater box on the outside of the firewall, the inside part has to be removed.
The kit is complete and includes the following:
- Evaporator kit with expansion valve and mounting hardware, grommets
- R-134a Hose kit (See hose kits page for contents)
- Black oring drier with drier straps
- 14 x 25 Condenser with condenser mount kit
- Sanden Style A/C compressor with clutch
- Compressor mount kit (to fit your Chevy engine)
- HI / Lo binary pressure switch
- Directions
If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt.
