1967 - 1972 Chevy Truck Underdash A/C System

1967 - 1972 Chevy truck a/c system.  Underdash mount A/C system.   The evaporator unit will mount under the dash of the truck, and span from the passenger side to the steering column.  The evaporator unit will require a small modification to the factory heater box, but it will not affect the performance of the heater system.   The evaporator unit has four vents with chrome outlines, and a simple knob control. 

The kit is complete and includes the following:

• Evaporator kit with expansion valve and mounting hardware, grommets
• R-134a Hose kit (See hose kits page for contents)
• Black oring drier with drier straps
• 14 x 20 Condenser with condenser mount kit 
• Sanden Style A/C compressor with clutch
• Compressor mount kit (to fit your Chevy engine)
• HI / Lo binary pressure switch
• Directions

If you need a different size condenser please specify the size in the checkout section.  The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included.  A fan and fan shroud should be used on the radiator, or a sufficient electric fan.  The setup requires a double groove water pump pulley, and a triple groove crank pulley.  Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side.    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.  The kit does not include the refrigerant, heater hoses, or belt.