1973 - 1987 C-series Chevy Pickup Truck A/C Kit

1973 - 1987 Chevy truck a/c system that fits behind the dash, the system looks original when installed.   The evaporator unit will sit above the heater box and will have four louvers that mount in the dashboard.  The vent panel above the glove box will be included with the kit, as well as two louvers on the driver side of the cab.  The driver side vents have to be cut into the dashboard.  The evaporator uses two rotary knob controls.  The evaporator has approximately 15000 BTU and 290 CFM.

The kit is complete and includes the following:

• Evaporator kit with expansion valve and mounting hardware, grommets
• Controls, louvers, duct hose
• R-134a Hose kit (See hose kits page for contents)
• Black oring drier with drier straps
• 14 x 25 Condenser with condenser mount kit 
• Sanden Style A/C compressor with clutch
• Compressor mount kit (to fit your Chevy engine)
• HI / Lo binary pressure switch
• Directions

If you need a different size condenser please specify the size in the checkout section.  The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included.  A fan and fan shroud should be used on the radiator, or a sufficient electric fan.  The setup requires a double groove water pump pulley, and a triple groove crank pulley.  Please specify if the alternator is on the driver or passenger side.  The kit does not include the refrigerant, heater hoses, or belt.