351 Cleveland Serpentine Drive Kit Alternator A/C & P/S

Style track serpentine conversion kit by March Performance for a 351 Cleveland and 400 CID modified engines running power steering and air conditioning.  The kit will convert the stock belt setup to a great looking high performance engine, with lots of shine.  The Style Track kit uses an unintrusive aluminum bracket across the front of the engine to mount the alternator, P/S pump and a/c compressor,  while keeping the components low for hood and engine compartment clearances.  The belt is adjusted around the engine pulleys, three idler pulleys, alternator, p/s pump, and  a/c compressor with a belt tension tool.  The tool will move the compressor and alternator in sync to provide an even look while keeping the belt from slipping.  The kit includes a GM type 2 power steering pump which requires use of a seperate resevoir, and new p/s hoses.  The setup uses a 105 amp alternator, and a Sanden style 7176 compressor.  This compressor has 6.10 cubic inch displacment which will provide enough circulation of oil and refrigerant for most aftermarket a/c systems.  The bracket is powder coated to protect the polished finish and to eliminate future polishing.  It is available in black powder coating, black onyx, and chrome as well.  See the drop down menu above.

The bracket conversion kit includes all brand new parts, which are listed below:

• Chrome 105 Amp Alternator
• Aluminum Alternator pulley with fan, and nose cover
• Chrome Sanden style 7176 a/c compressor with aluminum clutch cover
• Aluminum water pump pulley
• Alternator and A/C bracket with belt tensioning tool
• Aluminum crank pulley
• Edelbrock aluminum water pump 
• P/S pump
• P/S pulley and nose cover aluminum
• Three idler pulleys
• All necessary mounting hardware

The kit will require a 78" six rib serpentine belt, power steering hoses, power steering reservoir, and PN:SD1604 compressor fittings.   Upgrade your resevoir to billet!

The main picture is of the actual setup, some pictures are illustrating the upgrades and bracket coatings. This bracket setup is made in the USA by March Performance, the pictures are provided by March Performance.