351 Windsor Ultra Serpentine Conversion Kit Alt. A/C & Canister P/S

351 CID Winsdor alterrnator air conditioning compressor and power steering March Performance Ultra Serpentine Conversion kit.  This kit is designed to give you the brackets and pulleys to mount your power steering pump, alternator, and a compressor while using serpentine belts.  The kit is designed to work with the 1966 - 1974 canister style power steering pump.  The kit mounts the power steering pump on the driver side of the engine in front of the head.  The alternator mounts on the passenger side of the engine in front of the head and the compressor mounts down low (under the alternator).  The a/c bracket is designed to fit a Sanden style 7176 compressor.  This compressor has 6.10 cubic inch displacment which will provide enough circulation of oil and refrigerant for most aftermarket a/c systems.  This kit is a sure way to eliminate belt slipping on a 351 Windsor engine while making your engine stand out with all aluminum pulleys. The setup is a direct bolt on kit made from 6061-T6 aluminum, and are clear powder coated to protect from dulling.

The kit includes:

• Alternator bracket aluminum
• Stainless steel tensioning rods
• Crank Pulley aluminum
• Water pump pulley with nose cover aluminum
• Alternator pulley with nose cover aluminum
• Powersteering bracket
• Aluminum P/S pulley
• A/C compressor mounting bracket
• A/C compressor pulley nose cover
• Grade 8 mounting hardware.

The kit requires a reverse rotation water pump used on 1987-1993 Mustangs. A 7176 Sanden Style compressor and it also requires SD1604 compressor fittings, and a 88.5" belt.

This bracket setup is made in the USA by March Performance, the pictures are provided by March Performance.