# 6 High Side Inline Charge Port

Inline charge port for the high side on an R-134a system.  The inline port is an easy way to add a high side R-134a discharge port to any aftermarket a/c system.  The port has a male and a female oring fitting on each end with a 16mm high side R-134a charge port.  The threads are 5/8"-18 on both ends. The port is designed to go into the hose from the condenser to the evaporator, on either side of the drier. 

If your system does not have a high side charge port this is an easy way to add one. The high side is very important when reading the system for problems.  This fitting is the simplest way to add a charge port to any aftermarket system.  The port is made of steel with a zinc plating, we do not carry them in aluminum.