7176 SD7B10 Compressor Hardlines

Sanden 7176 hardline kit for low profile a/c lines on any vehicle.  These hardlines are unpolished aluminum lines that will run the hoses down low next to the compressor for a clean appearance.  The lines are designed to convert the 7176 compressor from pad mount fittings to oring connections.  The Oring fittings are #8 and #10.  The #8 fitting runs the hose to the large fitting on the condenser, and the # 10 runs from the compressor to the large fitting on the evaporator.

Thread sizes: # 8 = 3/4"-16 & # 10 = 7/8"-14  The lines are sold in pairs, and are made in the U.S.A.