Alternator & A/C Bracket w/ 90 Degree Motor Mounts
March Performance Style Track Alternator and A/C Compressor bracket kit without power steering.
1949-1953 Flathead Ford billet aluminum a/c alternator setup with a serpentine belt. This kit is designed to work with 90 degree motor mounts. The bracket setup will add a great look under the hood while adding a/c and a 105 amp alternator. The brackets are poslihed with clear powder coating; the clear powder coating protects the finish and eliminates polishing of the aluminum at a later date. The setup is designed to run three idler pulleys, the a/c and alternator, plus both water pumps. The idler pulleys provide plenty of belt tension to prevent the belt from slipping. The Sanden Style 7176 compressor has a cubic inch displacement of 6.10 which will provide enough circulation of the oil and refrigerant for any aftermarket a/c system.
- The kit includes:
- 105 amp alternator (Chrome or polished)
- Chrome Sanden Style 7176 compressor
- Billet A/C compressor clutch cover
- Alternator / A/C compressor bracket
- Two flathead ford water pumps
- Billet Crank pulley
- Three idler pulleys
The kit will only work with a Center mount distributor, it will not work with an offset intake. The kit will require a 108" six rib serpentine belt, and PN: SD1604 compressor fittings. The pictures of the black powder coated, chrome, and black onyx are for illustration only, they are not the actual setup.
If polished aluminum is not your style you do have the option of black powder coating, black onyx, or chrome plated. See the drop down menu above for this free upgrade.
This bracket setup is made in the USA by March Performance, the pictures are provided by March Performance.
