Billet Control Panels

Rectangle billet control panel for most aftermarket a/c systems.  This panel can be intergrated with any of our indash a/c systems, or added to a system that is already installed into a vehicle that uses vacuum to control the defrost. 

The panel measures 2" long X 4-1/2" wide on the face.  The mounting hole requirement is 1-11/16" x 4-1/4" and 2-3/4" deep.  The panel has a polished aluminum face with LED back lighting on the control face plates.  The control panel uses vacuum to acuate the heater control valve and the defrost. 

The panel will include all the necessary wires, heater control valve, vacuum actuators, check valves, vacuum tube, and directions. The panel is designed with an easy to hook up wiring systems.  The thermostat has a 36" long probe so it can be mounted a good distance from the evaporator box.  We include black and chrome knobs with the panel for the customer to use their preference.   If you system does not have defrost and you would like to add it, go to the defrost page to see the defrost adapter for vacuum controls.

Control panel will not work if the existing a/c system has the floor option for heat.