Complete Kit Chevrolet Cars - Select an Evaporator

Complete kit without an evaporator unit.  This product is here for the customer to purchase a complete kit without a pre-selected evaporator unit.  Please go to the evaporators page to choose the model evaporator unit you would like to use with your kit; or you can use an existing evaporator system.

This kit includes:

Sanden Style 709 compressor with clutch (Please specify V-belt or Serpentine pulley) Oring Drier with mounting strap Condenser with mounting straps (please specify size of the condenser from the condensers page) Compressor mount kit for a small block or big block chevy engine (please let us know if you have a long or short water pump, and which side of the engine the alternator is on (passenger or driver) R-134a hose kit:
2 each # 6 straight and 90 degree fittings
1 each # 8 straight and 90 degree fittings
1 each # 10 straight and 90 degree fittings
1 each # 8 90 degree with charge port
1 each # 10 90 degree with charge port
5 # 6 orings, 3 # 8 orings, 3 #10 orings
6 feet 5/16" (# 6) barrier hose
4 feet 13/32" (# 8) barrier hose
5 feet 1/2" (# 10) barrier hose
Directions

Please provide all the necessary information in the comments page during checkout. To check if you have a long or short water pump please look at the back of the water pump and the timing chain cover. If they are almost touching it is short, if there is a one inch space it is long.

As mentioned in the first paragraph.  If your vehicle came with factory air but the parts under the hood were removed this would be the kit to purchase.  You will need additional part depending on the year of the vehicle.  Please email us for the necessary parts.  If you have an aftermarket evaporator but need the rest of the kit this will include all the necessary parts.