ID-220 In-Dash Heat Air Evaporator Unit

A/C and heat evaporator unit designed to mount behind the dash board.  The evaporator has four round duct hose adapters, which use 2.5" flexible duct hose.  The controls and the vent louvers can be mounted in the dash or under the dash.   We offer a large variety of vents for these units.  Please see the duct hose and vents page for all the different options, if you would like to add defrost see the defrost Y's.  The evaporator has a three speed blower motor with a dual fan setup.  The evaporator unit has driver side a/c hose outlets, the fittings for the a/c hoses will be on the driver side of the unit when it is installed.  The picture shows how the unit mounts in the vehicle, the blower at the top, the drains at the bottom.  The evaporator has approximately 305 CFM and 15000 A/C BTU 13000 heat BTU.  The evaporator unit is compatible with R-134a and R-12 refrigerants.

The evaporator unit includes:

• Three speed blower motor
• Adjustable temperature thermostat
• Evaporator unit mounting hardware
• Expansion valve
• Drain tube & cork tape for hose fittings
• Orings
• Four rubber grommets
• Eight feet of 2.5" duct hose
• Four vents of your choice.
• Knob style controls with a face plate

The evaporator unit measures: 16" wide x 9" deep x 10.5" tall

If you would like to add this unit to a complete kit please go to the complete kits page and select the make of your vehicle.  In that selection we offer complete kits with "select an evaporator" option.  Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.

This evaporator unit is manufactured by Nostalgic Air Parts, Inc. in the U.S.A.