ID-260 Heat Air Defrost Indash Unit

Super compact unit for street rods

Price: $424.99

FREE Shipping on this item!

A/C, heat, and defrost evaporator unit designed to mount behind the dash board.  The evaporator has three 2.5" oval duct hose adapters for the vents, and two 2" defrost outlets.  The controls and the vent louvers can be mounted in the dash or under the dash, or you can use your factory controls and cables.  This unit is setup to use cable controls, if you need vacuum please contact us.  We do not offer electric controls.  If you want to use the factory controls we can adapter your a/c or non-a/c control panel to use this unit.  We may need you to send us your control panel, we will ship it back out to you within 48 hours.  We offer a large variety of vents for these units.  Please see the duct hose and vents page for all the different options. The evaporator has a three speed blower motor with a single fan setup.  The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The unit is to be mounted as it is pictured.  In most cars the glove box does not have to be altered.  The evaporator has approximately 275 CFM and 11000 BTU A/C and 9000 BTU heat.  The evaporator unit is compatible with R-134a and R-12 refrigerants.

The evaporator unit includes:

  • Three speed blower motor
  • Adjustable temperature thermostat
  • Evaporator unit mounting hardware
  • Expansion valve
  • Drain tube & cork tape for hose fittings
  • Orings
  • Four rubber grommets
  • Eight feet of 2.5" duct hose
  • Three vents of your choice.
  • Knob style controls with a face plate
  • Heater control valve w/ cable

The evaporator unit measures: 18" wide x 7.5" deep x 8.5" tall

If you would like to add this unit to a complete kit please go to the complete kits page and select the make of your vehicle.  In that selection we offer complete kits with "select an evaporator" option.  Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.

This evaporator unit is manufactured by Nostalgic Air Parts, Inc. in the U.S.A.

 

Frequently Purchashed With: ID-260 Heat Air Defrost Indash Unit

ID-260 Heat Air Defrost Indash Unit
+
Complete A/C Kit Mopar Vehicles - Select an Evaporator
+
R-134a Hose Kit 135 Degree Fittings, Drier, and More!

Price For All: $1,079.97

- $424.99

Related Videos

1968 Road Runner with a Nostalgic Air Parts A/C system

At Nostalgic Air Parts we do not let a vehicle leave our shop unless the vents are blowing below 45 degrees with the doors open.  This video displays our ID260 evaporator in a Road Runner with the doors open on a 90 degree day.   The system has our UD-340 gauge panel in it with the gauges and vents located in the pod.  The system also has our condenser setup with the drier and vertical condenser located on it.  The fan in front of the condenser is a 14" Maradyne high performance fan, notice the fan is barely heard.  The glove box in the car is not altered at all, the final shot is the glove box.