Toyota Landcruiser Kit No compressor bracket (BJ Diesel engine)

Complete heat air and defrost system for a (BJ) Toyota Landcruiser with a diesel engine.  The kit includes a slimline evaporator unit that fits under the dash with our direct fit brackets. The system will include all the necessary block off plates, and grommets to route the hoses through the firewall.  The kit will not interfere with the stock glove box, it does require the removal of the factory heater system.  The defrost outlets on the evaporator unit will hook up to the factory defrost outlets under the dash.  The system has electric controls, no cables necessary.  All four controls are moutned into the evaporator unit next to the four vent outlets.  We do not have a compressor mount bracket for the BJ Cruiser, so we offer this kit with a universal compressor mount bracket that can be used to fabricate a compressor mount bracket.

The kit is brand new and includes:

• Heat air defrost evaporator unit with mounts, block off plates, grommets, and expansion valve
• Electronic controls
• Universal compressor mount bracket
• Sanden style compressor with clutch assembly and oil
• 44-1418 Superflow condenser with condenser mount kit
• Oring drier with mount strap
• R-134a hose kit
• High / low pressure switch
• Directions

This kit is designed to use R-134a refrigerant.  The kit will include the major components to add the system, R-134a refrigerant, heater hoses, and a belt are not included.  Your Cruiser may need the radiator fan upgraded if it is not sufficient.  The a/c hoses do not come pre-crimped.  The hoses will need to be crimped before the final installation.

The compressor mount plate is a flat bracket with ears that will mount up to the included compressor.  The plate is made of heavy duty steel that can be welded or bolted to for bracket fabrication.  We do not have any templates for the brackets fabrication; we have sold this setup for many cruisers.

The evaporator unit is manufactured in the USA by Nostalgic Air Parts, Inc.