UD-105HC Under-Dash Heat and Air Evaporator Unit

A/C and heat evaporator unit designed to mount under the dash board.  The evaporator has two rectangle louvers in the center of the unit and two round louvers on 45 degree angles facing the driver and passenger.  The louvers can be turned in all directions or shut off completely.  The controls are located on the center of the unit.  The evaporator has a three speed blower motor with a dual fan setup.  The evaporator unit has passenger side hose outlets for the air conditioning, the fittings for the hoses will be on the passenger side of the unit when it is installed.  The heater hoses will be on the driver side when the unit is installed.  The evaporator has approximately 290 CFM, 14000 BTU A/C & 12000 BTU heat.  The evaporator unit is compatible with R-134a and R-12 refrigerants.

The evaporator unit includes:

• Three speed blower motor
• Adjustable temperature thermostat
• Evaporator unit mounting hardware
• Expansion valve
• Drain tube & cork tape for hose fittings
• Orings
• Cable operated heater control vavle with cable
• Four rubber grommets

The evaporator unit measures: 16" wide x 13" deep x 5" tall

If you would like to add this unit to a complete kit please go to the complete kits page and select the make of your vehicle.  In that selection we offer complete kits with "select an evaporator" option.  Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.

This evaporator unit is manufactured by Nostalgic Air Parts, Inc, in the U.S.A.